Main Subjects = مواد مرکب پلیمری
Number of Articles: 32
Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites

Articles in Press, Accepted Manuscript, Available Online from 17 March 2024

10.22034/ijme.2024.435372.1917

Hossein Kazemi; Mazaher Salamat-Talab; Davood Ghanbari

An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.427374.1881

Alborz Mohebi; Gholamhossein Majzoobi; Mohammad Kashfi

Study of the effect of fumed silica on mechanical, electrical, and magnetic properties of epoxy/ fumed silica composite

Articles in Press, Accepted Manuscript, Available Online from 06 May 2024

10.22034/ijme.2024.426954.1879

Reza Sarkhosh; mohammad kazemi nasrabadi; Reza ParsaFar

Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer

Articles in Press, Accepted Manuscript, Available Online from 06 May 2024

10.22034/ijme.2024.433178.1893

Vahid Zal; Hossein Talebi-Ghadikolaee; Sadegh Mirzamohammadi

Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels

Volume 8, Issue 11, February 2022, Pages 1-15

Mahdi Farhadi; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari Jam

Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test

Volume 8, Issue 7, September 2021, Pages 20-30

Majid Nouri Kamari; Faramarz Ashenai Ghasemi; Gholam Hossein Rahimi Sherbaf; Kazem Reza Kashyzadeh

Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes)

Volume 8, Issue 4, June 2021, Pages 12-18

S. Hossein Elahi; Mobina Fakhimi; mohamad Abdi

Reliability Analysis of Failure in Composite Pressure Vessels

Volume 8, Issue 4, June 2021, Pages 50-61

Roham Rafiee; Sahar Bazargani

Experimental investigation of Buckling after impact strength of grid stiffened composite panels

Volume 7, Issue 11, January 2021, Pages 34-41

ahmad Ataei; Hamed Ahmadi; Amin Farrokhabadi

Experimental Investigation of Aluminum Foam Sandwich Panels under Quasi-static Loading

Volume 7, Issue 7, September 2020, Pages 14-23

Saeed Darab; mohammad hossein pol; Abbas Rahi

Study and investigation of cutting energy and chip formation in the grinding process of polyether ether ketone

Volume 7, Issue 7, September 2020, Pages 51-58

Mohammad Khoran; Bahman Azarhoushang; Hossein Amirabadi

An experimental and numerical study on the low-velocity impact behavior of polymer matrix Kevlar-Basalt hybrid composites

Volume 7, Issue 6, August 2020, Pages 44-55

mohammadreza karamooz; Hossein Rahmani; Hamed Khosravi

The effect of knurling surface treatment on the strength of adhesively bonding between steel plate and carbon-phenolic composite

Volume 7, Issue 5, July 2020, Pages 44-55

Shervin Esfandiari mazandaran; Ehsan Shakouri; Shahram Etemadi Haghighi

Study on the mechanical properties of functionally graded material made by centrifugal method

Volume 7, Issue 4, June 2020, Pages 10-18

Mohsen Moradi; Masoud Farahnakian

Experimental and numerical investigation on crushing of metal-composite hybrid energy absorber under a quasi-static loading

Volume 6, Issue 8, January 2020, Pages 54-66

mehdi Tayyebati; Hamed Ahmadi; Gholamhossein Liaghat

Investigation and effect of number of recycling steps on molten flow rate and crystalline percent in injection process in wood-plastic composite

Volume 6, Issue 3, July and August 2019, Pages 1-7

zahra salahshornejad; Ehsan Shakouri; shahram etemadi; mohamad najafi

Iranian Journal of Manufacturing Engineering

Journal Archive